Fine 190mm Wide Engineered Oak Wood Flooring with a Smoked Brushed Stained and Invisible Oiled Finish
These most beautiful quality smoked, brushed, stained and invisible oiled finished engineered Oak flooring / planks will compliment any property.
• Available in Engineered
. Size 14/3mm Thickness x 190mm Width x 1900mm Length.
• Finish: Smoked Brushed Stained and Invisible Oiled
• Grade: Classic – Includes some Filled knots and slight colour variation due to a natural product.
• Profile: Multi-Plywood Core and Micro Bevelled – Tongue and Groove – Micro Bevel to sides
. Underfloor Heating: Yes this flooring is compatible to use with underfloor heating. Correct guidelines must be followed. The maximum face temperature should not exceed 26 Degrees C.
Stock Availability: We hold a stock of this Engineered Smooth Faced Oak Flooring although it is best if you call us in the first instance. We can then confirm exactly what is available.
Viewing: We invite all clients to visit and view our vast display of wood flooring in our showrooms where you will be made most welcome.
Delivery: Nationwide and Worldwide Delivery Service is available. Please contact us for further details. Orders over 50M2 is FREE DELIVERY to UK
Installation: We recommend that this flooring should be installed using one of three following floor fitting techniques.
Option one, ‘floating floor’, which is achieved by gluing the tongue and groove profiles of the board and allow the floor as a whole to float, usually cushioned with use of an underlay, various thickness are available.
Option two would be to secret nail through the tongue profile of the plank into a plywood subfloor.
Finally, option three would be to use Sikabond 54 flexible adhesive for a full stick down method, other adhesives are available but this would be our personal recommendation with the engineered oak planks directly onto the dry screed or Birch Plywood subfloor.
Nb: It is recommended that you should use a Sikabond Mb Primer on all screed subfloors when it has a dry moisture content.
Pack Size: 2.89m2
Pallet Size: 115.6m2
Please Contact Us to discuss your requirements: 01980 625857 / 623829 or M: 07799 707040
Please use the wood floor calculator above or call us and we will calculate the number of packs that you require, plus answer your technical questions which you may have.
|Type: Engineered Oak Wood Floor
Size: 14/3mm Thickness x 190mm Width x 1900mm Length.
Profile: Multi-Plywood Core and Micro Bevelled.
Pack Size: 2.89m2 per pack.Pallet Size: 115.6mInstallation Full Stick Down is Recommended – Porta Nail or Floating with an underlay is another option
Accessories: A Sikabond Mb Primer may be required – Sikabond 54 flexible adhesive.Underlay.
|Finish: Smoked Brushed Stained and Invisible Oiled
Colour: Mid Tones
Grade: Classic Grade includes some filled knots
Veneer: Yes – Engineered
Construction: Engineered – Multi-Plywood Core with Oak wear layer.
Wood Species: Oak